Bolier sampling system	Hydrazine analyzer	Sodium ion monitor
HDIC-4	HYM-300	EMNA-10
lEnable pH control of pure & ultra pure water lTemperature compensation by RTD (platinum) lRepeatability of ±0.03pH,±1digit lScaling function enables response to slight changes  l2 points automatic calibration function lElectrode performance test & self diagnosis functions available lDisplay switchable between temperature & pH lMeas.range:pH 0.00～14.00,0.00～ 99.9℃	lContinuous measurement of hydrazine concentration in boiler water lStabilization determination function during calibration lBest suited for monitoring of residual hydrazine concentration which eliminates dissolved oxygen within boiler water lMeas.range:0～999.9ug/L	lContinuously measures Naion concentration of ppb order within boiler water lMonitors degradation of ion-exchange system lMeas.range:0～0.1/1～100/10～1000ppb(manually switched)
Continunous silica analyzer	Auto calibration pH meter	Conductivity/resistivity meter
CDIC-1	DODI-1	DHDI-1
lReliable measurement attainable for pure & ultra pure water lTemperature compensation by RTD (platinum) lEquipped with 2 input channels thus 2 points sample measurement possible lWide measurement range lAlternates display of conductivity, receptivity & temperature lMeas.range:0.00～20.00us/cm or MΩ/cmF.S.(3 ranges),0.00～99.9℃	lResponsive to wide range of needs from general use to nuclear power station lDirectly reads off DOlevel of ug/L order lHighly responsive to rapid changes lEase of calibration attained with ambient calibration method lMeasurable with closed loop lEquipped with automatic range function lAlternates display of ug/L,mg/L & % lMeas.range:0.0～20.00mg/L0～250% F.S.(4 ranges)	lMonitors high temperature oxide corrosion of material by ultra supercritical pressure lAlternates display of ug/L,mg/L & % lEase of calibration attained by ambient calibration method lHighly responsive to rapid changes lMeasurable with closed loop lEquipped with automatic range function lMeas.range:0.0～20.00mg/L 0～200% F.S.(4 ranges)
Dissolved oxygenmeter	Dissolved hydrogen meter
BSC	SLF-103
lCooler, pressure reducer, valves, flow meter & thermostat chamber all built into one unit lExtraction of sample for analysis from boiler lWe manufacture whole system from analyzer to sampler lSample condition: Maximum temperature:600℃,maximum pressure:30MPa ,maximum flou rate:3L/min	lMeasures concentration of ionic state silica within water lContinuous flow analysis method by Molybdenum blue absorptiometry used lWall mounting lSingle or 6 flow paths selectable lMeas.range:0～50/0～500ug/L