| Transmitter
for industrial dissolved oxygen analyzer |
Transmitter
for industrial low concentration DO analyzer |
Intrinsically
safe explosion protected DO analyzer |
 |
 |
 |
ODM-135(2-wire)/
ODM-136(4-wire) |
ODM-100(s-wire)/
DOM-110(4-wire) |
SOD-35D/SOC sreies
detector
SOD-37D/SNOC sreies detector |
lTransmitter for dissolved oxygen analyzer with built-in microcomputer
lSingle -action span calibration
lAutomatic electrode deterioration function
lMeas.range: 0 ～20mg/L
|
lTransmitter for low
concentration dissolved oxygen analyzer with built-in microcomputer
lIsolated input/output,
digital display & rainproof field installation type
lSimple air calibration method employed
lAutomatic electrode deterioration function
lMeas.range: 0 ～999.9ug/L
|
l2-wire type intrinsically safe explosion protected DO analyzer
lImmersion type (washable)/Flow-through type available
lMeas.range: 0 ～19.99mg/L(DO)(SOD-35D),0～25%(O)(SOD-37D) |
|
|
|
| CP
series intrinsically safe conductivity
analyzer/transmitter |
Transmitter
for industrial dissolved oxgen (DO) analyzer |
Transmitter
for industrial DO analyzer |
 |
 |
 |
| DCP-20T/SDCP-20T |
OBM-336 |
OBM-300 |
lFree angle mounting with rigid aluminum case
lAuto calibration for standard solution & arbitrary range setting by microprocessor
lOperation & wiring possible from anterior surface
lCompliance with IEC(Ex)
intrinsically safe explosion proof type (SDCP-20T)
lMeas. range:DO…0～50mg/L O…0～25% SAT…0～25% Temperature…0～100℃ |
lTransmitter for dissolved oxygen analyzer with built-in microcomputer
lSafety detecting function available during calibration
lDetection function for damage on electrode membrane (contact
output) available as option
lMeas.range:0～20mg/L
|
lTransmitter with built-in microcomputer for measurement of low concentration ug/L order
lBest suited for power plant & ultra pure water plant for semiconductor when combined with our detector OC-64 model
lMeas.range: 0～999.9ug/L |
|
|
|
| Panel
mount DO analyzer |
Industrial
DO indication controller |
DO
detector for ultra pure water |
 |
 |
 |
| OBM-100/OBM-136 |
DDIC-7 |
OC-64/OC-65 |
lCompact DIN96size
lBuilt micro computer
lImproved perfomance & operability
lMeas.range: OBM-100:Low level cincentration(0～500ug/L)
OBM-136:General(0～500mg/L)
|
lCompact DIN96 size
lVarious output (lower lower limit,lower limit,upper limit,upper upper limit),twin timer output available
lSimultaneous display of
temperature available
lSelf-diagnostic function,
electrode deterioration detecting function & calibration error message display function available
lCompensation function for salinity
lProvision of RS-232Cinterface(option)
lSimultaneous display of temperature
lMeas.range:0～20mg/L,0～100℃
|
lBest suited for measurement of boioer water of power plants
lAccurate results attainable with small sample since sample is discarded after each measurement OC-65
MODEL: sample cut-off detector installed |
|
|
|
|
| Industrial
CO2 indicating controller
|
Industrial temerature indicating
controller
|
Industrial
turbidity indicating controller |
|
|
 |
| CGDIC-7
|
TDIC-7
|
TBDIC-7 |
lCompact DIN96size
lVarious output (lower lower limit,lower limit,upper limit,upper upper limit),twin timer output available
lSelf-diagnostic function,
electrode deterioration detecting function & calibration error message display function available
lProvision of RS-232C interface (option)
lSimultaneous display of temperature available
Meas.range:0～200% mg/L display available as well,0～100℃
|
lCompact DIN96size
lVarious output (lower lower
limit, lower limit,upper limit, upper upper limit), twin timer output available
lSelf-diagnostic function available
lProvision of RS-232C interface (option)
lMeas.range:-10.0～100.0℃
|
lCompact DIN96size
lSelf-diagnostic & error message number display functions available
lRS-232C equipped as standard specification
lSimultaneous display of temperature available
lRange:0 ～200～800NTU(mg/L),0～50.0℃
|
